fortigate-ipsec-40-mr3

Configure the FortiGate dialup client FortiGate dialup-client configurations
Destination Address
Name
Action Select IPSEC.
VPN Tunnel
Select the address name that you defined in Step 3 for
the private network behind the dialup server.
Select the name of the phase 1 configuration that you
created in Step 1.
Clear Allow inbound to prevent traffic from the remote
network from initiating the tunnel after the tunnel has
been established.
Select Allow outbound to enable traffic from the local
network to initiate the tunnel.
Place the policy in the policy list above any other policies having similar source and
destination addresses.
IPsec VPNs for FortiOS 4.0 MR3
140 01-434-112804-20120111
http://docs.fortinet.com/