Distributed I/O System ET 200S

Digital electronic modules
3.20 2RO NO/NC 24 VDC to 48 VDC/5 A, 24 VAC to 230 VAC/5 A digital electronic module (6ES7132-4HB10-
0AB0)
2RO NO/NC 24 VDC to 48 VDC/5 A, 24 VAC to 230 VAC/5 A Technical Specifications
(6ES7132-4HB10-0AB0)
Dimensions W × H × D
Dimensions and Weight
15 × 81 × 52 (mm)
(the total dimensions depend on the selected
terminal module)
Weight Approx. 50 g
Supports isochronous operation
Data for specific modules
no
Number of outputs
Cable length
2
• Unshielded max. 600 m
• Shielded max. 1000 m
Parameter length 3 bytes
Voltages, currents, potentials
Rated supply voltage L+ (from the power
module)
24 VDC
Reverse polarity protection Current per channel Yes
• up to 50 °C max. 5 A
• Up to 60 °C max. 4 A
Galvanic isolation
• Between the channels Yes
• Between channels and backplane bus Yes
• Between the channels and supply voltage Yes
• Between the supply voltage and backplane
bus
Yes
Permissible potential difference
• Between the supply voltage and backplane
bus
75 VDC / 60 VAC
• Between channels and backplane bus 240 VAC
• Between the channels and supply voltage 240 VAC
Insulation tested
• Between the supply voltage and backplane
bus
500 VDC
• Between channels and backplane bus 2500 VDC
• Between the channels and supply voltage 2500 VDC
Current consumption
• From the power supply L+ max. 30 mA
• From the backplane bus max. 10 mA
Power dissipation of the module Typically 0.6 W
ET 200S
3-84 Manual, 12/2005, A5E00514527-03