Distributed I/O System ET 200S

More documents

Recommendations

Info

New Information About the "ET 200S Distributed I/O System Manual" 3.3 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0) Analog value generation Measuring principle Sigma-Delta Conversion and cycle time • Integration time can be assigned parameters Yes • Interference frequency suppression in Hz 60 50 None • Conversion time in ms (per channel) 17 20 0,04 • Cycle time in ms (per module) 18 21 0,5 Resolution (including overrange) ± 10 V / 15 bits + sign ± 5 V / 15 bits + sign 1 V to 5 V / 15 bits Suppression of interference, error limits Interference voltage suppression for f = n x (f1 ± 0.5 %), (f1 = interference frequency) • Common-mode interference (USS) • Series-mode interference (peak interference value < rated value of input range) • Crosstalk between the inputs Operational limit (in the entire temperature range, with reference to the input range) Min. 100 dB Min. 90 dB Min. -100 dB ± 0.1% with interference frequency suppression ± 0.2% without interference frequency suppression Basic error limit (operation limit at 25°C) ± 0.05% with interference frequency suppression ± 0.1% without interference frequency suppression Temperature error (with reference to the input ± 0.003 %/K range) Linearity error (with reference to the input range) ± 0,01 % Repeatability ± 0,01 % (in steady state at 25 °C with reference to the input range) Sensor selection data Input range (rated value) / input resistance • Voltage ± 10 V / min. 0.8 MΩ ± 5 V / min. 0.8 MΩ 1 V to 5 V / min. 0.8 MΩ Permitted input voltage (destruction limit) 35 V continuous 75 V for 1 ms max., pulse duty factor 1: 20 Smoothing of the measured values Yes, parameters can be assigned in 4 steps by means of digital filtering Step Time constant None 1 x cycle time Weak 4 x cycle time Medium 16 x cycle time Strong 32 x cycle time ET 200S 3-6 Product Information, 12/2006, A5E00743001-02
I&M functions New Information About the "ET 200S Distributed I/O System Manual" 3.4 2AI I 2/4WIRE High Feature Analog Electronic Module (6ES7134-4MB02-0AB0) Reading of the I&M data from the module is possible with interface modules as from a higher order number (MLFB) or as from a higher firmware/product version than described in the following table: Interface module Order no. Firmware version Product version IM151-1 HIGH FEATURE 6ES7151-1BA01-0AB0 V2.0 02 IM151-3 PN 6ES7151-3AA20-0AB0 V4.0 01 IM151-3 PN HIGH FEATURE 6ES7151-3BA20-0AB0 V4.0 01 IM151-3 PN FO 6ES7151-3BB21-0AB0 V4.0 01 3.4 2AI I 2/4WIRE High Feature Analog Electronic Module (6ES7134-4MB02-0AB0) 4.13 2AI I 2/4WIRE High Feature Analog Electronic Module (6ES7134-4MB02-0AB0) Properties • 2 inputs for measuring current • Input ranges: – ± 20 mA, resolution 15 bits + sign – 4 mA to 20 mA, resolution 15 bits • Isolated from the load voltage L+ • Permitted common-mode voltage between the channels 100 VAC • Supports two-wire or four-wire measuring transducers • Supports isochronous operation – Minimum time for the synchronous DP cycle (TDPmin): 0.7 ms – Minimum conversion time of the input modules: (TWEmin): 0.5 ms • Supports I&M functions ET 200S Product Information, 12/2006, A5E00743001-02 3-7
Page 1 and 2:
SIMATIC Distributed I/O System ET 2
Page 3 and 4:
Table of contents 1 Terminal module
Page 5 and 6:
Table of contents 4.3 Basics of ana
Page 7:
Table of contents Table 4-10 SIMATI
Page 10 and 11:
Terminal modules 1.1 Terminal modul
Page 12 and 13:
Terminal modules 1.3 TM-P15S22-01,
Page 14 and 15:
Terminal modules 1.4 TM-P30S44-A0 a
Page 16 and 17:
Terminal modules 1.5 TM-PF30S47-F1
Page 18 and 19:
Terminal modules 1.6 TM-E15S26-A1,
Page 20 and 21:
Terminal modules 1.8 TM-E15S24-01,
Page 22 and 23:
Terminal modules 1.9 TM-E15S23-01,
Page 24 and 25:
Terminal modules 1.10 Terminal modu
Page 26 and 27:
Terminal modules 1.12 TM-E30S44-01
Page 28 and 29:
Terminal modules 1.13 TM-C120S and
Page 30 and 31:
Terminal modules 1.14 TE-U120S4x10
Page 32 and 33:
Power modules 2.2 Parameters for po
Page 34 and 35:
Power modules 2.3 PM-E 24 VDC power
Page 36 and 37:
Power modules 2.4 PM-E 24-48 VDC po
Page 38 and 39:
Power modules 2.4 PM-E 24-48 VDC po
Page 40 and 41:
Power modules 2.5 PM-E 24-48 VDC/24
Page 42 and 43:
Power modules 2.5 PM-E 24-48 VDC/24
Page 44 and 45:
Power modules 2.6 Placing power mod
Page 46 and 47:
Power modules 2.7 Example of a conf
Page 48 and 49:
Power modules 2.8 Finding the corre
Page 50 and 51:
Digital electronic modules 3.1 Para
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Digital electronic modules 3.3 2DI
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Digital electronic modules 3.12 2DO
Page 98 and 99:
Page 100 and 101:
Digital electronic modules 3.13 Sta
Page 102 and 103:
Digital electronic modules 3.13 Sta
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Digital electronic modules 3.19 2RO
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Analog electronics modules 4.2 Anal
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Analog electronics modules 4.3 Basi
Page 152 and 153:
Page 154 and 155:
Page 156 and 157:
Page 158 and 159:
Page 160 and 161:
Analog electronics modules 4.4 Resp
Page 162 and 163:
Analog electronics modules 4.5 Para
Page 164 and 165:
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Analog electronics modules 4.6 2AI
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
Page 182 and 183:
Page 184 and 185:
Page 186 and 187:
Page 188 and 189:
Page 190 and 191:
Page 192 and 193:
Page 194 and 195:
Page 196 and 197:
Page 198 and 199:
Page 200 and 201:
Page 202 and 203:
Page 204 and 205:
Page 206 and 207:
Page 208 and 209:
Page 210 and 211:
Page 212 and 213:
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Page 222 and 223:
Page 224 and 225:
Page 226 and 227:
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Analog electronics modules 4.19 2AO
Page 234 and 235:
Page 236 and 237:
Page 238 and 239:
Page 240 and 241:
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251: 4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.2
Page 266 and 267: Potential distributor module 6.1 Po
Page 268 and 269: Potential distributor module 6.1 Po
Page 270 and 271: RESERVE modules Pin assignment Note
Page 272 and 273: Glossary Configuration Connecting t
Page 274 and 275: Glossary Frequency converter Ground
Page 276 and 277: Glossary Power modules Prewiring Pr
Page 278 and 279: Glossary Real time Reference potent
Page 280 and 281: Glossary Terminal modules Terminati
Page 282 and 283: Index Analog electronic module 2AI
Page 284 and 285: Index T Terminal module TM-E15S24-0
Page 286 and 287: Safety Guidelines This manual conta
Page 288 and 289: Table of contents ET 200S iv Produc
Page 290 and 291: Introduction ET 200S 1-2 Product In
Page 292 and 293: New Information About the "ET 200S
Page 318 and 319: Index ET 200S Index-2 Product Infor
Page 320 and 321: Safety Guidelines This manual conta
Page 322 and 323: Table of contents Distributed I/O S
Page 324 and 325: Introduction 1.1 Introduction Distr
Page 326 and 327: Product Information 2.2 Digital Ele
Page 338 and 339: Index Distributed I/O System ET 200
Page 340 and 341: Product Information on Manual Distr
show all

Distributed I/O System ET 200S

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?