Distributed I/O System ET 200S

Analog electronics modules
4.21 2AO I Standard analog electronic module (6ES7135-4GB01-0AB0)
Suppression of interference, limits of error
Crosstalk between the outputs min. -40 dB
Operational limit (in the entire temperature
range, with reference to the output range)
± 0.5 %
Basic error limit (operational limit at 25 °C
with reference to output range)
± 0.3 %
Temperature error (with reference to the
output range)
± 0.01 %/K
Linearity error (with reference to the output
range)
± 0.02 %
Repeatability
(in steady state at 25 °C with reference to
output range)
± 0.05 %
Output ripple (with reference to output range,
bandwidth 0 to 50 kHz)
± 0.02 %
Output range (rated value)
Data for selecting an actuator
± 20 mA
4 to 20 mA
Load resistance max. 500 Ω
• For inductive load 1 mH
• Open circuit voltage 18 V
Destruction limit against voltages/currents
applied from outside
• Voltage at the outputs to MANA 15 V continuous; 75 V for max. 1 ms
(sampling ratio 1:20)
• Current max. 50 mA DC
Connection of actuators
• Two-wire connection Yes
• Four-wire connection no
ET 200S
Manual, 12/2005, A5E00514527-03 4-109