Distributed I/O System ET 200S

Digital electronic modules
3.12 2DO 24 VDC/0.5 A Standard digital electronic module (6ES7132-4BB01-0AA0)
3.12 3.12
Properties
Peculiarity
Status, interrupts, diagnostics
Status display Green LED per channel
Diagnostics function no
Input voltage
Data for selecting a sensor
• Rated value 230 VAC
• For signal "1" 164 to 264 VAC
• For signal "0" 0 to 40 V AC
Input current
• At signal "1"
5 to 15 mA
Input delay
• at "0" to "1" 15 ms
• At "1" to "0" 45 ms
Input characteristic curve according to IEC 61131, type 1
Connection of two-wire
BEROs
no
• Permitted bias current max. 2 mA
2DO 24 VDC/0.5 A Standard digital electronic module
(6ES7132-4BB01-0AA0)
• Digital electronic module with two outputs
• Output current 0.5 A per output
• Rated load voltage 24 VDC
• Short-circuit protection
• Suitable for solenoid valves, DC contactors, and indicator lights
When you connect the 24 VDC rated load voltage to the power module by means of a
mechanical contact, depending on the circuit the digital outputs carry the "1" signal for
approximately 50 µs. You need to take this into account if you connect the module to fast
counters.
ET 200S
3-48 Manual, 12/2005, A5E00514527-03