Distributed I/O System ET 200S

New Information About the "ET 200S Distributed I/O
System Manual" 3
Introduction
This information is new and replaces the information in Sections 4.5.2, 4.5.6, 4.7, 4.13, 4.20
and 4.22 in the ET 200S I/O Distributed I/O System Manual (A5E00514526-03), release
12/2005.
3.1 Parameters for Analog Electronic Modules 2AI U High Feature and 2AI
I 2/4WIRE High Feature
4.5.2 Parameters for Analog Electronic Modules 2AI U High Feature and 2AI I 2/4WIRE High Feature
Table 3-1 Parameters for analog electronic input modules U, I High Feature
2AI U High Feature 2AI I 2/4WIRE High
Feature
Group diagnostics (parameter assignment error,
internal error)
Diagnostics: Overflow/underflow • Disable
Interference frequency suppression 3 • Disable
Diagnostics: Wire break 2 Diagnostics: Wire break 1 • Disable
Smoothing3 • None
• Weak
• Medium
• Strong
Type/range of
measurement
--- Type/range of
measurement
1 Only in the measuring range 4 mA to 20 mA
2 Only in the measuring range 1 V to 5 V
3 Not at isochronous operation
--- • De-activated
• ± 5 V
• 1 V to 5 V
• ± 10 V
Value range Default setting Range of
efficiency
• Disable
Disable Module
• Enable
Disable Module
• Enable
Disable Module
• Enable
Disable Channel
• Enable
• De-activated
• 4 mA to 20 mA, 2DMU
• 4 mA to 20 mA, 4DMU
• ± 20 mA
None Channel
± 10 V Channel
4 mA to 20 mA,
4DMU
Channel
ET 200S
Product Information, 12/2006, A5E00743001-02 3-1