Distributed I/O System ET 200S

New Information About the "ET 200S Distributed I/O System Operating Instructions"
2.3 Evaluating the Interrupts of the ET 200S
2.3 Evaluating the Interrupts of the ET 200S
8.1.3 Evaluating the Interrupts of the ET 200S
"Process interrupt lost" Diagnostics
2.4 Interrupts
8.1.4.10 Interrupts
The "Process interrupt lost" diagnostics is not available for modules at present.
Note
Process interrupts should not be used for technological purposes (e.g. cyclical generation of
process interrupts).
If more than approximately 90 process interrupts are generated per second, process
interrupts may be lost.
Process interrupt of analog input modules
Figure 2-1 Structure as of Byte x+4 and Byte x+5 for process interrupt (analog input)
ET 200S
Product Information, 12/2006, A5E00743001-02 2-3