Distributed I/O System ET 200S

New Information About the "ET 200S Distributed I/O System Manual"
3.3 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0)
3.3 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0)
4.7 2AI U High Feature Analog Electronic Module (6ES7134-4LB02-0AB0)
Properties
General terminal assignment
• 2 inputs for measuring voltage
• Input ranges:
– ± 5 V, resolution 15 bits + sign
– ± 10 V, resolution 15 bits + sign
– 1 V to 5 V, resolution 15 bits
• Isolated from the load voltage L+
• Permitted common-mode voltage between the channels 100 VAC
• Supports isochronous operation
– Minimum time for the synchronous DP cycle (TDPmin): 0.7 ms
– Minimum conversion time of the input modules: (TWEmin): 0.5 ms
• Supports I&M functions
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
Terminal assignment for 2AI U High Feature (6ES7134-4LB02-0AB0)
Terminal Assignment Terminal Assignment Notes
1 M0+ 5 M1+ • Mn+: Input signal "+", channel n
2 M0- 6 M1- • Mn-: Input signal "-", channel n
3 n.c. 7 n.c. • n.c.: Not connected (max. 30 VDC can be connected)
4
A4
n.c.
AUX1
8
A8
n.c.
AUX1
• AUX1: Protective-conductor terminal or potential bus (freely usable
up to 230 VAC)
A3 AUX1 A7 AUX1
ET 200S
Product Information, 12/2006, A5E00743001-02 3-3