Distributed I/O System ET 200S

3.8 3.8
Characteristics
Digital electronic modules
3.8 4DI 24 VUC to 48 VUC High Feature digital electronic module (6ES7131-4CD00-0AB0)
Data for selecting a sensor
Input voltage
• Rated value 24 V DC
• For signal "1" 11 to 30 V
• For signal "0" -30 to 5 V
Input current
• With "1" signal
Typ. 8 mA
Input delay (parameters can be assigned)
• At "1" after "0" 0.1 ms (0.05 to 0.15 ms)
0.5 ms (0.4 to 0.6 ms)
3 ms (2.7 to 3.3 ms)
15 ms (14.85 to 15.15 ms)
• At "1" after "0" 0.1 ms (0.05 to 0.15 ms)
0.5 ms (0.4 to 0.6 ms)
3 ms (2.7 to 3.3 ms)
15 ms (14.85 to 15.15 ms)
Input characteristic curve According to IEC 61131, Type 1
Connection of 2-wire BEROs Supported
• Permitted quiescent current max. 1.5 mA
1 Per module
4DI 24 VUC to 48 VUC High Feature digital electronic module
(6ES7131-4CD00-0AB0)
General terminal assignment
• Digital electronics module with four inputs
• Rated input voltage 24 VAC/VDC to 48 VAC/VDC
• Diagnostics: Wire break
• Diagnostics: Fuse blown
• Diagnostics: Missing load voltage
• Suitable for switches and proximity switches (BEROs)
• Supports isochronous operation
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
ET 200S
Manual, 12/2005, A5E00514527-03 3-27