Distributed I/O System ET 200S

Analog electronics modules
4.9 2AI I 2WIRE Standard analog electronic module (6ES7134-4GB01-0AB0)
Block diagram
ET 200S
4-52 Manual, 12/2005, A5E00514527-03
Figure 4-9 Block diagram of the 2AI I 2WIRE Standard
2AI I 2WIRE Standard Technical Specifications (6ES7134-4GB01-0AB0)
Dimensions W × H × D (mm)
Dimensions and Weight
15 x 81 x 52
(the total dimensions depend on the selected
terminal module)
Weight Approx. 40 g
Supports isochronous operation
Data for specific modules
no
Number of inputs
Cable length
2
• Shielded max. 200 m
Parameter length 4 bytes
Voltages, currents, potentials
Rated load voltage L+ (from the power
module)
24 VDC
• Reverse polarity protection Yes
Power supply of the transmitters Yes
• Short-circuit protection Yes, (destruction limit 35 mA per channel)
Galvanic isolation
• Between the channels and backplane bus Yes
• Between the channels and load voltage
L+
no
• Between the channels no
Insulation tested
Current consumption
500 VDC
• From load voltage L+ max. 80 mA
Power dissipation of the module Typically 0.6 W