Distributed I/O System ET 200S

New Information About the "ET 200S Distributed I/O System Manual"
3.6 2AO I High Feature Analog Electronic Module (6ES7135-4MB02-0AB0)
2AO I High Feature Technical Specifications (6ES7135-4MB02-0AB0)
Dimensions and weight
Dimensions W x H x D (mm)
15 x 81 x 52
(the total dimensions depend on the selected
terminal module)
Weight Approx. 40 g
Supports isochronous operation
Data for specific modules
Yes
Supports I&M functions Yes
Number of outputs
Cable length
2
• Shielded Max. 200 m
Max. 100 m at TWA < 2 ms
Parameter length 7 bytes
Analog value representation S5 and S7 format
Voltages, currents, potentials
Rated supply voltage of the electronics L+ 24 VDC
• Reverse polarity protection Yes
Galvanic isolation
• Between the channels and backplane bus Yes
• Between modules and power supply of the
electronics
Yes
• Between the channels No
Permissible potential difference
• Between MANA and Minternal 75 VDC / 60 VAC
Insulation tested 500 VDC
Current consumption Max. 80 mA
• From the power supply L+
Power dissipation of the module Max. 1.2 W
Status, interrupts, diagnostics
Diagnostics functions
• Group error display Red "SF" LED
• Diagnostic information readable Yes
• Wire break diagnostics Yes, at input range 4 mA to 20 mA
Substitute values can be applied Yes, parameterizable
ET 200S
Product Information, 12/2006, A5E00743001-02 3-19