Distributed I/O System ET 200S

Digital electronic modules
3.7 4DI 24 VDC High Feature digital electronic module (6ES7131-4BD01-0AB0)
Voltages, currents, potentials
Rated supply voltage (from the power module) 24 V DC
• Reverse battery protection Yes
Electrical isolation
• Between the channels No
• Between the channels and backplane bus Yes
Permissible potential difference
• Between the different circuits 75 VDC / 60 VAC
Insulation test voltage 500 V DC
Current consumption
• From supply voltage Depends on sensor
Power dissipation of the module Typically 0.7 W
Status, alarms, diagnostics
Status display Green LED per channel
Interrupts
• Process interrupt Programmable
Diagnostics function
• General fault Red LED "SF"
• Diagnostic information can be displayed Yes
Output voltage
Sensor supply outputs
• With load min. L+ (-0.5 V)
Output current
• Rated value 500 mA
• Permitted range 0 mA to 500 mA
Short-circuit protection Yes, electronic 1
ET 200S
3-26 Manual, 12/2005, A5E00514527-03