Distributed I/O System ET 200S

More documents

Recommendations

Info

Analog electronics modules 4.13 2AI I 2/4WIRE High Feature analog electronic module (6ES7134-4MB00-0AB0) 2AI I 2/4WIRE High Feature Technical Specifications (6ES7134-4MB00-0AB0) Dimensions W × H × D (mm) Dimensions and Weight 15 x 81 x 52 (the total dimensions depend on the selected terminal module) Weight Approx. 40 g Supports isochronous operation Data for specific modules no Number of inputs Cable length 2 • Shielded max. 200 m Parameter length 4 bytes Voltages, currents, potentials Rated load voltage L+ (from the power module) 24 VDC • Reverse polarity protection Yes Power supply of the transmitters Yes • Short-circuit protection Yes, 60 mA (for both channels) Galvanic isolation • Between the channels and backplane bus Yes • Between the channels and load voltage L+ Yes • Between the channels and PE Yes • Between the channels no Permissible potential difference • Between the channels 140 VDC/100 VAC (with isolated power supply for the measuring transducer) Insulation tested Current consumption 500 VDC • From load voltage L+ max. 53 mA Power dissipation of the module Diagnostics function Typically 0.85 W Status, interrupts, diagnostics • Group error Red "SF" LED • Diagnostic functions readable Yes ET 200S 4-68 Manual, 12/2005, A5E00514527-03
Analog electronics modules 4.13 2AI I 2/4WIRE High Feature analog electronic module (6ES7134-4MB00-0AB0) Measuring principle Analog value generation Integrative Integration and cycle time/resolution per channel: • Integration time can be assigned parameters Yes • Interference frequency suppression in Hz 60 50 no • Integration time in milliseconds 16.67 20 7.5 • Conversion time in ms – 1 channel active per module 25 30 10 – 2 channels active per module 58.3 70 26 • Cycle time in ms – 1 channel active per module 75 90 30 – 2 channels active per module 175 210 78 • Resolution (including overrange) ± 20 mA/15 bits + sign 4 mA to 20 mA/15 bits Suppression of interference, limits of error Interference voltage suppression for f = n x (f1 ± 0.5 %), (f1 = interference frequency) • Common-mode interference (USS) min. 100 dB • Series-mode interference (peak interference value < rated value of input range) min. 90 dB Crosstalk between the inputs min. -100 dB Operational limit1 (over the entire temperature range, with reference to the input range) ± 0.1 % Basic error limit1 operational limit at 25 °C with reference to input range ± 0.05 % Temperature error (with reference to the input range) ± 0.003 %/K Linearity error (with reference to the input range) ± 0.03 % Repeatability (in steady state at 25° C with reference to input range) ± 0.01 % Data for selecting a sensor Input range (rated value)/input resistance • Current ± 20 mA/50 Ω 4 mA to 20 mA/50 Ω Permitted input current (destruction limit) 40 mA (on a single channel) Load of the two-wire measuring transducer max. 750 Ω ET 200S Manual, 12/2005, A5E00514527-03 4-69
Page 1 and 2:
SIMATIC Distributed I/O System ET 2
Page 3 and 4:
Table of contents 1 Terminal module
Page 5 and 6:
Table of contents 4.3 Basics of ana
Page 7:
Table of contents Table 4-10 SIMATI
Page 10 and 11:
Terminal modules 1.1 Terminal modul
Page 12 and 13:
Terminal modules 1.3 TM-P15S22-01,
Page 14 and 15:
Terminal modules 1.4 TM-P30S44-A0 a
Page 16 and 17:
Terminal modules 1.5 TM-PF30S47-F1
Page 18 and 19:
Terminal modules 1.6 TM-E15S26-A1,
Page 20 and 21:
Terminal modules 1.8 TM-E15S24-01,
Page 22 and 23:
Terminal modules 1.9 TM-E15S23-01,
Page 24 and 25:
Terminal modules 1.10 Terminal modu
Page 26 and 27:
Terminal modules 1.12 TM-E30S44-01
Page 28 and 29:
Terminal modules 1.13 TM-C120S and
Page 30 and 31:
Terminal modules 1.14 TE-U120S4x10
Page 32 and 33:
Power modules 2.2 Parameters for po
Page 34 and 35:
Power modules 2.3 PM-E 24 VDC power
Page 36 and 37:
Power modules 2.4 PM-E 24-48 VDC po
Page 38 and 39:
Power modules 2.4 PM-E 24-48 VDC po
Page 40 and 41:
Power modules 2.5 PM-E 24-48 VDC/24
Page 42 and 43:
Power modules 2.5 PM-E 24-48 VDC/24
Page 44 and 45:
Power modules 2.6 Placing power mod
Page 46 and 47:
Power modules 2.7 Example of a conf
Page 48 and 49:
Power modules 2.8 Finding the corre
Page 50 and 51:
Digital electronic modules 3.1 Para
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Digital electronic modules 3.3 2DI
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Digital electronic modules 3.12 2DO
Page 98 and 99:
Page 100 and 101:
Digital electronic modules 3.13 Sta
Page 102 and 103:
Digital electronic modules 3.13 Sta
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Digital electronic modules 3.19 2RO
Page 126 and 127:
Page 128 and 129:
Page 130 and 131:
Page 132 and 133:
Page 134 and 135:
Page 136 and 137:
Analog electronics modules 4.2 Anal
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
Page 150 and 151:
Analog electronics modules 4.3 Basi
Page 152 and 153: Analog electronics modules 4.3 Basi
Page 160 and 161: Analog electronics modules 4.4 Resp
Page 162 and 163: Analog electronics modules 4.5 Para
Page 172 and 173: Analog electronics modules 4.6 2AI
Page 232 and 233: Analog electronics modules 4.19 2AO
Page 250 and 251: 4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.2
Page 252 and 253:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.2
Page 254 and 255:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.2
Page 256 and 257:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.3
Page 258 and 259:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.3
Page 260 and 261:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.3
Page 262 and 263:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.4
Page 264 and 265:
4 IQ-SENSE (6ES7138-4GA00-0AB0) 5.4
Page 266 and 267:
Potential distributor module 6.1 Po
Page 268 and 269:
Potential distributor module 6.1 Po
Page 270 and 271:
RESERVE modules Pin assignment Note
Page 272 and 273:
Glossary Configuration Connecting t
Page 274 and 275:
Glossary Frequency converter Ground
Page 276 and 277:
Glossary Power modules Prewiring Pr
Page 278 and 279:
Glossary Real time Reference potent
Page 280 and 281:
Glossary Terminal modules Terminati
Page 282 and 283:
Index Analog electronic module 2AI
Page 284 and 285:
Index T Terminal module TM-E15S24-0
Page 286 and 287:
Safety Guidelines This manual conta
Page 288 and 289:
Table of contents ET 200S iv Produc
Page 290 and 291:
Introduction ET 200S 1-2 Product In
Page 292 and 293:
New Information About the "ET 200S
Page 294 and 295:
Page 296 and 297:
Page 298 and 299:
Page 300 and 301:
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Page 312 and 313:
Page 314 and 315:
Page 316 and 317:
Page 318 and 319:
Index ET 200S Index-2 Product Infor
Page 320 and 321:
Safety Guidelines This manual conta
Page 322 and 323:
Table of contents Distributed I/O S
Page 324 and 325:
Introduction 1.1 Introduction Distr
Page 326 and 327:
Product Information 2.2 Digital Ele
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Page 334 and 335:
Page 336 and 337:
Page 338 and 339:
Index Distributed I/O System ET 200
Page 340 and 341:
Product Information on Manual Distr
show all

Distributed I/O System ET 200S

Create successful ePaper yourself

Delete template?

Save as template?