Distributed I/O System ET 200S

New Information About the "ET 200S Distributed I/O System Manual"
3.5 2AO U High Feature Analog Electronic Module (6ES7135-4LB02-0AB0)
I&M functions
Reading of the I&M data from the module is possible with interface modules as from a higher
order number (MLFB) or as from a higher firmware/product version than described in the
following table:
Interface module Order no. Firmware version Product version
IM151-1 HIGH FEATURE 6ES7151-1BA01-0AB0 V2.0 02
IM151-3 PN 6ES7151-3AA20-0AB0 V4.0 01
IM151-3 PN HIGH FEATURE 6ES7151-3BA20-0AB0 V4.0 01
IM151-3 PN FO 6ES7151-3BB21-0AB0 V4.0 01
3.5 2AO U High Feature Analog Electronic Module
(6ES7135-4LB02-0AB0)
4.20 2AO U High Feature Analog Electronic Module (6ES7135-4LB02-0AB0)
Properties
• 2 outputs for voltage output
• Output range:
– ± 5 V, resolution 15 bits + sign
– ± 10 V, resolution 15 bits + sign
– 1 V to 5 V, resolution 15 bits
• Isolated from the load voltage L+
• Supports isochronous operation
– Minimum time for the synchronous DP cycle (TDPmin): 0.7 ms
– Minimum conversion time of the output modules: (TWAmin): 0.5 ms
• Supports I&M functions
ET 200S
3-12 Product Information, 12/2006, A5E00743001-02