Distributed I/O System ET 200S

Power modules
2.8 Finding the correct power module for an I/O device
2.8 2.8
Finding the correct power module for an I/O device
Applicability of power modules
The following table describes which power modules you can use with the different I/O
modules:
Power modules I/O modules
PM-E 24 VDC Can be used with all electronic modules except the 120 VAC Standard, 2DI 230 VAC
Standard, and 2DO 120/230 VAC.
PM-E 24 VDCto 48 VDC Applicable
PM-E 24 VDC to
48 VDC/24 VAC to 230 VAC
PM-E F pm 24 VDC
PROFIsafe
PM-E F pp 24 VDC
PROFIsafe
PM-E F 24 VDC PROFIsafe
• Can be used with all electronic modules except the 2DI 120 VAC Standard, 2DI 230 VAC
Standard, and 2DO 120 VAC/230 VAC.
• For UC electronic modules if the maximum load voltage is 24 VDC and AC is not
required
Can be used with all electronic modules.
For the fail-safe modules.
See the ET 200S Distributed I/O System Fail-Safe Modules manual
PM-D For motor starters and frequency converters.
See ET 200S Motor Starter manual ET 200S FC Frequency Converter operating
instructions
PM-D F For fail-safe applications with motor starter or frequency converter.
See ET 200S Motor Starter manual ET 200S FC Frequency Converter operating
instructions
ET 200S
2-18 Manual, 12/2005, A5E00514527-03