Distributed I/O System ET 200S

Analog electronics modules
4.9 2AI I 2WIRE Standard analog electronic module (6ES7134-4GB01-0AB0)
4.9 4.9
Properties
Input ranges (rated value)/input resistance
Data for selecting a sensor
• Voltage ± 10 V/min. 100 kΩ
± 5 V/min. 100 kΩ
± 2.5 V/min. 100 kΩ
1 V - 5 V/min. 100 kΩ
Maximum input voltage for voltage input
(destruction limit)
Connection of the sensors
• For measuring voltage
50 V continuous, 100 V at max. duration of 1 ms
(sampling ratio 1:20)
supported
Smoothing of the measured values Yes, can be assigned parameters in 4 steps by means
of digital filtering
Step
Time constant
None
1 x cycle time
Weak
64 x cycle time
Medium
128 x cycle time
Strong
512 x cycle time
1 DPV1 only
2 Parameter assignment error
Violation of lower limit value
Violation of upper limit value
Open circuit (only with 1 V to 5 V)
Process interrupt lost
2AI I 2WIRE Standard analog electronic module
(6ES7134-4GB01-0AB0)
General terminal assignment
• 2 inputs for measuring current
• Input range:
4 to 20 mA, resolution 13 bits
Note
Terminals 4, 8, A4, A8, A3 and A7 are only available at specified terminal modules.
ET 200S
4-50 Manual, 12/2005, A5E00514527-03