PV*SOL Expert 6.0 - Manual - Valentin Software
PV*SOL Expert 6.0 - Manual - Valentin Software
PV*SOL Expert 6.0 - Manual - Valentin Software
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
11.3.1.1 Technical Input<br />
(grid-connected system) Calculation > Economic Efficiency Calculation > Technical Input<br />
This dialog shows the basic parameters in <strong>PV*SOL</strong> which are relevant for the Economic<br />
Efficiency Calculation.<br />
-> How to proceed in Germany:<br />
1. Economic Efficiency Variant: Name your system.<br />
2. Start Date: Enter the system operation start date, it is required for the proportionate<br />
allowance for lodgements and disbursements made in the first year.<br />
3. If you let the option British / Italian Feed-in Tariff, empty, then the German EEG is used<br />
for calculations.<br />
The following technical data are displayed:<br />
• Peak PV power,<br />
• PV electricity generated in first year,<br />
• conserved electricity (in first year)<br />
• Electricity to grid (in first year)<br />
4. Enter the percentage of the PV electricity legally compensated. (EEG 2012: in Germany:<br />
80%; other countries (until further notice): 100%)<br />
The corresponding data are calculated and displayed:<br />
• Maximum compensated electricity fed into the grid<br />
• unpaid electricity fed into the grid<br />
5. Calculate savings: Choose either:<br />
Calculate Savings from Reference Tariff, then you can load a Household Tariff. The<br />
corresponding saving is displayed in €/kWh, or<br />
Set Predetermined Savings, then you enter a value in €/kWh.<br />
6. Calculate payment: Choose either:<br />
Calculate Payment from Feed-in Tariff, then you can load a Feed-in Tariff. The<br />
corresponding payment is displayed in €/kWh, or<br />
Set Feed-in Payment, then you enter a value in €/kWh.<br />
7. Market value of unpaid electricity fed into the grid: Enter the payment you can achieve.<br />
(No legal regulation)<br />
8. Continue to the next page to set the General Parameters or Close the economic efficiency<br />
calculation.<br />
-> How to proceed in Great Britain or Italy:<br />
1. Economic Efficiency Variant: Name your system.<br />
2. Start Date: Enter the system operation start date, it is required for the proportionate<br />
allowance for lodgements and disbursements made in the first year.<br />
119