PV*SOL Expert 6.0 - Manual - Valentin Software

10.1.6.6 Border Distances
System (2D) > Technical Data >
Array i > (Generator Output)
Roof Parameter > Context
Menu (right-click on roof)
Border Distances
In the Border Distances
window you can specify
barred areas of a certain
width for the borders of
your roof.
-> Proceed as follows:
1. In the tree view
select the roof area.
2. and in the input field click the Border Distances button .
3. If you want to define equal border distances for all the boundaries of your roof,
then select the option For all Borders and enter a number in the edit field on the
right-hand side of the window.
4. Otherwise enter individual border distances for each border of the roof in the table
on the left side.
5. Close the window with OK.
90