PV*SOL Expert 6.0 - Manual - Valentin Software

10.1.6.7.3 New PV Area
System (2D) > Technical Data > Array i > (Generator Output) Roof Parameter > New 2D
Object > PV Area
-> Requirement:
1. You have defined the roof area.
2. You have defined necessary barred areas.
-> Proceed as follows:
1. Enter a reference name for your new PV area.
2. Select one of the geometric standard forms:
Rectangle
Trapezium
Triangle
3. Enter the form sizes.
4. Or, if needed select the option "Fit to roof area"
The new PV area takes the shape and dimensions of the existing roof area.
5. Or, select the option "Based on number of modules":
The size of the new PV area is determined for a specified module formation.
- Enter the number of rows and columns in the planned module formation.
- The resulting power of the module formation is displayed.
6. Tick the Cover roof afterwards box to add PV modules to the new array area
automatically after you click on OK.
7. Close the dialog using OK.
The roof is visualized accordingly.
94