PV*SOL Expert 6.0 - Manual - Valentin Software

PV*SOL Expert 6.0 - Manual
120
3. Select the option British / Italian Feed-in Tariff.
The following technical data are displayed:
• Peak PV power,
• PV electricity generated in first year,
• Conserved electricity (in first year)
• Electricity to grid (in first year)
4. Enter the following data:
• Income from PV generation with inflation
• Period of validity for Tariff
• Income from Export to Utility Grid with inflation
• Outgoing Cost of Energy from Utility Grid with inflation
5. Continue to the next page to set the General Parameters or Close the economic efficiency
calculation.
Glossary
Peak PV Power:
The output of the system defined in PV*SOL under Standard Test Conditions.
(STC: 25°C module temperature, sunlight spectrum of AM 1.5 and 1000 W/m²
irradiation.)
PV Electricity Supplied to Grid in First Year:
This specifies the amount of electricity fed into the grid in a whole year. The
month that the system started operation and degradation are not allowed for here.
Electricity Costs Saved in First Year:
This specifies the cost saving made on electricity drawn from the grid in a whole
year. The month that the system started operation and degradation are not
allowed for here.
Use Tariff to Calculate Income from PV Generation:
For the Payment Received for Grid Supply the following rule applies: the amount
shown is paid, for example, for 20 full years plus the months in the first year of
operation.