PV*SOL Expert 6.0 - Manual - Valentin Software

10.1.2.3 Stand-alone inverter
(stand-alone) System > Technical data > option AC appliances > Stand-alone inverter
-> Requirement:
If AC appliances are selected, there must be a stand-alone inverter which converts the PV
DC into AC for them.
-> How to proceed:
1. Load a Stand-alone inverter. The dialog Load file is opened.
2. Select an inverter.
If the desired inverter is not available, please enter it via Database > Inverter/ For
stand-alone systems.
Exit the dialog with OK.
3. The following data are displayed:
AC power rating, maximum output of power consumers, installed PV output,
nominal DC voltage, battery voltage
The AC power rating of the inverter should match the maximum output of the
appliances
The nominal DC voltage should match the battery voltage.
69