PV*SOL Expert 6.0 - Manual - Valentin Software

10.1.6.7.1 New Roof Area
System (2D) > Technical Data > Array i > (Generator Output) Roof Parameter > New 2D Object >
Roof Area
-> Proceed as follows:
1. Enter a reference name for your new 2D object.
2. Open the window Border Distances where you can specify barred areas for the
borders of your roof.
3. Select on of the geometric standard forms:
Rectangle
Trapezium
Triangle
4. Enter the form sizes.
5. For simple roof areas without barred areas and border distances:
Tick the Cover roof to maximum box to give the new roof area a PV area the same size as
your roof.
PV modules will then be added automatically when you click on OK.
6. If necessary, repeat the respective process for Barred areas and the PV area.
7. Close the dialog using OK.
The roof is visualized accordingly.
92