PV*SOL Expert 6.0 - Manual - Valentin Software

10.1.6.7 New 2D Object
System (2D) > Technical Data > Array i > (Generator Output) Roof Parameter > New 2D Object
The New 2D Object dialog lets you define new 2D objects for your project.
-> Proceed as follows:
1. Click the button . The dialog "New 2D Object" opens.
2. First, select the object type in the drop-down menu at the top left: Roof Area,
Barred Area or PV Area.
3. Then enter a reference name for your new 2D object.
4. Depending on the selected object type, different standard forms and options are available
for defining the new 2D object.
91