PV*SOL Expert 6.0 - Manual - Valentin Software

12.2.4 Formatting the Y-Axis
The y-axis is formatted in this dialog window.
Unit
Select the unit to be displayed from the field labelled Unit. If you select Position on Right
the y axis will be placed on the right-hand side of the diagram.
Position of the Y-Axis
In this field you can select the cross-over point of the axes. You can select either minimum
(zero) or maximum, or you can enter a value yourself.
By selecting the field Own Scale you can format another y-axis for the selected data
record.
Minimum Value
Enter the smallest value to be illustrated for the data record.
Maximum Value
Enter the largest value to be illustrated for the data record.
Main Intervals
The labelled intervals along the y-axis.
Sub-Intervals
The division of the main intervals along the y axis.
151