PV*SOL Expert 6.0 - Manual - Valentin Software
PV*SOL Expert 6.0 - Manual - Valentin Software
PV*SOL Expert 6.0 - Manual - Valentin Software
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
10.1.3 Technical data, grid connected<br />
System > Technical data > PV Array / Array i<br />
Inverter Concept<br />
In grid connected operation, there are systems which use a central System inverter or<br />
systems<br />
with one inverter per Array or string and module inverters, i.e. with several inverters.<br />
The system inverter is defined on the System inverter page.<br />
When designing with several inverters, the information on the inverter is part of the Array<br />
page.<br />
Arrays<br />
Enter the number of arrays.<br />
The PV output, gross area and active solar surface are calculated and displayed.<br />
PV array or arrays<br />
On the next page(s), the PV array or the arrays are specified<br />
System inverter<br />
Here, select a suitable system inverter.<br />
The following data are displayed:<br />
MPP tracking range, MPP voltages (STC) of the arrays, inverter output, system output<br />
-> Buttons in the right-hand area:<br />
• Click on Losses to check the influence of losses in the DC cabling.<br />
• To check the configuration of modules and inverters, click on the Check button.<br />
• System diagram shows the print preview of the system schematic also included in<br />
the summary report. Each array is summarized as a PV symbol and an inverter<br />
symbol.<br />
• Following a positive Check of the system, you can start the Simulation.<br />
-> See also:<br />
Technical data, stand-alone<br />
Technical data<br />
73