PV*SOL Expert 6.0 - Manual - Valentin Software

Ł ->
Instruction
:
Consumption - Individual Appliances - Define an Appliance
Uncheck the option "all
days the same" and
define individual daily
reduction times.
in Operation:
Click on month
field or
day field
(green)
Not in
Operation: Click
on month field
or
day field
(white)
in Operation:
Click on hour
field (green)
Not in Operation:
Click on hour
field (white)
o User-independent appliance:
- appliance runs constantly or
- appliance runs every X hours/Minutes.The duration is calculated
automatically from the annual energy requirement and, if applicable, the
Stand-by Input, you have entered.
- In combination with the months and days in use, the total number of
operating days is calculated and displayed.
o User-dependent appliance:
- nightime only: Operating hours are valid, if simultaneously, the global
irradiation is zero.
- daytime only: Operating hours are valid, if simultaneously, the global
irradiation is bigger than zero.
- in combination with all days the same / Day
- In combination with the months and days in use, the total number of
operating days is calculated and displayed.
o Short-time use appliance:
- Enter the period of use in [min] or energy requirement in [kWh] per use.
- Enter the number of uses per hour (in combination with all days the same
/ Day).
- in combination with the months and days in use, the total number of
operating days is calculated and displayed.
o Light:
- in total darkness: The given operating hours are valid, if simultaneously,
the global irradiation is zero.
- at dusk: The given operating hours are valid, if simultaneously, the global
irradiation is less than 20 W/m².
- cloudy weather: The given operating hours are valid, if simultaneously,
the global irradiation is less than 50 W/m².
57