Structural Health Monitoring Using Smart Sensors - ideals ...

Straser, E. G. & Kiremidjian A. S. (1996). "A modular visual approach to damage monitoring
for civil structures." Proceedings of SPIE - Smart Structures and Materials, San
Diego, CA, 2719, 112-122.
Straser, E. G. & Kiremidjian A. S. (1998). "A modular, wireless damage monitoring system
for structures." The John A. Blume Earthquake Engineering Center Technical Report,
128.
Studer, M. & Peters, K. (2004). “Multi-scale sensing for damage identification”, Smart
Materials and Structures, 13, 283-294.
Sun, C. T. and Lu, Y. P. (1995). Vibration damping of structural elements. Englewood
Cliffs, NJ: Prentice Hall.
Tang, J. P. and Leu, K. M. (1989). “Vibration tests and damage detection of P/C bridges”
ICOSSAR 1989, Proceedings of 5th International Conference on Structural Safety
and Reliability, ASCE, San Francisco, CA, 2263-2266.
Tanner, N. A., Farrar, C. R., & Sohn, H. (2002). “Structural health monitoring using wireless
sensing systems with embedded processing.” Proceedings of SPIE - NDE and
Health Monitoring of Aerospace Materials and Civil Infrastructure, 4704, 215-224.
Tanner, N. A., Wait, J. R., Farrar, C. R., & Sohn, H. (2003). “Structural health monitoring
using modular wireless sensors.” Journal of Intelligent Material Systems and Structures,
14(1), 43-56.
Texas Instruments. (2007) “Is DSP Right for You?”
(Mar. 2, 2007).
The MathWorks, Inc. (Mar. 2, 2007).
TinyOS. (Mar. 2, 2007).
Toksoy, T. & Aktan, A. E. (1994). “Bridge-condition assessment by modal flexibility.”
Experimental Mechanics, 34, 271-278.
Vapnik, V. (1998). Statistical Learning Theory, New York: Wiley.
Wang, M. L., Gu, H., Lloyd, G. M., & Zhao, Y. (2003). “A multi-channel wireless PVDF
displacement sensor for structural monitoring.” Proceedings of Int. Workshop on Advanced
Sensors, Structural Health Monitoring and Smart Structures, Tokyo, Japan, 1-
6.
West, W. M. (1984). “Illustration of the use of modal assurance criterion to detectstructural
changes in an orbiter test specimen.” Proceedings of Air Force Conference on Aircraft
Structural Integrity, 1-6.
Williams, C. & Salawu, O. S. (1997). “Damping as a damage indication parameter.” Proceedings
of 15th International Modal Analysis Conference, 1531-1536.
Wong, K.-Y. (2004). “Instrumentation and health monitoring of cable-supported bridges.”
Structural Control and Health Monitoring, 11(2), 91-124.
177