Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6.1 INTRODUCTION<br />
MC 3000<br />
Operating Manual<br />
6. THE UTILITY OPERATING MODE<br />
The Utility operating mode allows access to all the MC-3000's global functions, such as:<br />
• the reception MIDI (control channel, MIDI Filters, Bulk Dump)<br />
• the MIDI Monitor<br />
• The setting of the System Controllers, including the ranges of the sliders and the pedals<br />
• the second relating to the creation of tables and curves<br />
• The settings of the mouse and all the accessory functions.<br />
In this operating mode, the WRITE key is only enabled in sections n. 4 (EDIT TABLES)<br />
and n.5 (EDIT CURVES). In all the other sections, the settings made are saved<br />
automatically.<br />
The first video page which appears on the display as soon as this operating mode is<br />
selected using the relative key in the group of MODE keys on the right of the front panel is<br />
as shown below:<br />
This video page shows all the sections of the UTILITY mode, each of which can be<br />
accessed by selecting the corresponding option using the cursor keys or the encoder and<br />
confirming ENTER, or by pressing the function key associated to each of them directly.<br />
6.2 MIDI COMMON<br />
6.2.1 Introduction<br />
The MIDI COMMON option is selected from the UTILITY MASTER video page to access<br />
the section which contains the overall MIDI reception functions plus the bulk dump<br />
procedures; note that they are unaffected by the selected patch and any other process in<br />
progress.<br />
6.2.2 CONTROL CHANNEL (CCH)<br />
The first page in this section, which appears automatically when the MIDI COMMON<br />
option is selected, is dedicated to the choice of a reception channel the messages of<br />
which will be interpreted by the MC-3000 (Control Channel).<br />
109