Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MC 3000<br />
Operating Manual<br />
manufacturer of the transmitter device. The message is only displayed if the "Display<br />
Message" field in the "Midi common/Control channel" section is set at YES.<br />
CURVE AUTO-REPAIRED !<br />
During editing of a dynamic (or aftertouch) curve, the control software has noted the<br />
presence of illegal values inside the curve and has automatically corrected it.<br />
(Section) BULK DUMP OUT!<br />
During the BULK DUMP procedure these messages indicate the section being saved<br />
(dispatch of the sys-ex strings relating to the MIDI OUT port).<br />
DUMP OUT COMPLETED !<br />
The Bulk Dump procedure has been terminated correctly.<br />
DUMP OUT ABORTED !<br />
The Bulk Dump procedure has been interrupted by the user and so the saving procedure<br />
has not been completed.<br />
BULK DUMP IN RECEIVED !<br />
This message indicates that the MC-3000 is receiving the Bulk Dump data.<br />
BULK DUMP IN ABORTED !<br />
The Bulk Dump reception procedure has been interrupted by the user or a serious error<br />
has occurred during reception of the data. Caution: after this message is displayed,<br />
some of the instrument's memory locations might suffer problems. Repeat the operations,<br />
remembering not to interrupt the bulk dump procedure once it has been started.<br />
CHAIN EMPTY !<br />
139