Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone

MC 3000
Operating Manual
described for the PORT NAME ASSIGN subpage, type the name of the program
change, moving around with the cursor keys and using the alphanumeric keyboard, the
function keys F1, F2, F3, F4 and F5 and the encoder.
5. Once the name has been typed, the user presses the function key F6 in line with the
DONE icon in the bottom right-hand corner of the display to confirm the name typed.
To abort the modification, press the ESC key; in both cases, the system returns to the
main menu page.
6. Use the cursor keys to locate on PROGRAM CHANGE N= and select the next program
changes using the encoder or the INC and dEC keys, repeating operations 5, 6 and 7
described above for each program change.
7. On completion, when all the program changes have been named, press WRITE and
the following video page will appear:
Here the display shows, as display only, the current location of the table which has
been modified, and allows the user to select its destination location.
8. Use the cursor keys to locate on DESTINATION and use the encoder or INC and DEC
keys to set the destination location.
9. To assign a name to the table, press F6 next to the Name icon in the bottom right-hand
corner of the display. The writing video page will return to the screen; it is similar to the
page which appeared in point 3 of this example, except that here the user is prompted
to type the name of the table instead of that of the individual program.
10. Use the writing procedure described in point 5 to type the name of the table and to
confirm the name typed, press the function key F6 next to the DONE icon in the bottom
right-hand corner of the display. To abort the modification, press ESC. In both cases,
the WRITE page described in point 8 will return to the screen.
122