Manuale italiano-inglese Oberheim-Viscount MC3000 - Synth Zone

MC 3000
Operating Manual
7.3 STATUS MESSAGES
ONE ZONE !
The SOLO function has been recalled in a patch containing only one active zone. In view
of its characteristics, the SOLO function can only be activated when at least two zones are
active.
SENDING PANIC MESSAGE
You have requested the Panic function (cursor keys and simultaneously): the
message persists on the display until the messages have been emitted.
PEDAL (da 1 a 8) JACK INSERTED !
The MC-3000 has noted the insertion of a jack in one of the pedal connectors. At switchon,
the instrument will always display the relative message if one or more jacks are
connected.
PEDAL (da 1 a 8) JACK EJECTED !
The MC-3000 has noted ejection of the jack from the pedal connectors.
CTRL: (Control Change name)
A warning that a control change has been received on the MC-3000 control channel.
This control will be interpreted as a system control and re-dispatched to all the zones in
ON condition. The message is only displayed if the "Display Message" field in the "Midi
common/Control channel" section is set at YES.
CTRL: PROGRAM CHANGE
Informs the user of reception of a Program Change on the control channel, with
consequent change in the selected patch. The message is only displayed if the "Display
Message" field in the "Midi common/Control channel" section is set at YES.
SYS EX: (manufacturer's name)
Informs the user of reception of an exclusive system string on an MC-3000 MIDI IN port.
As well as the message "Sys ex", the instrument also displays the name of the
138