SwitchBlade x3112 Installation Guide - Allied Telesis

More documents

Recommendations

Info

Chapter 3: Troubleshooting Cannot Establish a Local (Out-of-Band) Management Session If you are unable to establish a local (out-of-band) management session with the switch through the terminal port on the front panel, do the following: Check to be sure that the RJ-45 serial management cable is securely connected to the serial terminal port on the switch and to the RS-232 port on the terminal or personal computer. Check to be sure that the operating parameters on the terminal or the terminal emulation program, if you are using a personal computer, have been set correctly. The default settings for the RJ-45 serial terminal port are located in “Starting a Local Management Session” on page 93. Check to be sure that the terminal emulator application is compatible with a VT-100 terminal. Check to be sure that the configuration settings conform with those given in “Starting a Local Management Session” on page 93. 104
Appendix A Technical Specifications Physical Specifications Dimensions W x D x H): AT-SB<strong>x3112</strong> Chassis 48.03 cm x 38.79 cm x 31.01 cm (18.91 in x 15.27 in x 12.21 in) AT-SBx3161 System Power Supply AT-SBx3165 PoE Power Supply AT-SBx31FAN Tray All Cards AT-SBx31CFC Fabric Control Card AT-SBx31GP24 PoE Line Card AT-SBx31GS24 SFP Line Card AT-SBx31GT24 Line Card AT-SBx31XZ4 XFP Line Card Weight (Kilograms) AT-SB<strong>x3112</strong> Chassis AT-SBx3161 System Power Supply AT-SBx3165 PoE Power Supply AT-SBx31FAN Tray AT-SBx31CFC Fabric Control Card AT-SBx31GP24 PoE Line Card AT-SBx31GS24 SFP Line Card AT-SBx31GT24 Line Card AT-SBx31XZ4 XFP Line Card 10.16 cm x 32.21 cm x 4.34 cm (4.00 in x 12.68 in x 1.71 in) 10.16 cm x 32.21 cm x 4.34 cm (4.00 in x 12.68 in x 1.71 in) 2.74 cm x 33.35 cm x 26.04 cm (1.08 in x 13.13 in x 10.25 in) 20.67 x 31.32 cm x 40.64 cm (8.14 in x 12.33 in x 1.6 in) 17.77 kg (39.10 lb) with 3 PSU and 10 Line Card blank panels 2.75 kg (6.05 lb) with power cord 2.73 kg (6.00 lb with power cord 1.82 kg (4.00 lb) 1.09 kg (2.40 lb) 1.06 kg (2.34 lb) 1.06 kg (2.34 lb) 0.93 kg (2.05 lb) 0.82 kg (1.80 lb) 105
Page 1 and 2:
M/S PSU FAN MASTER SLAVE NORMAL FAU
Page 3 and 4:
Electrical Safety and Emissions Sta
Page 5 and 6:
Contents Preface ..................
Page 7 and 8:
List of Figures Figure 1: Front Vie
Page 9 and 10:
List of Tables Table 1. Safety Symb
Page 11 and 12:
Preface This guide provides the har
Page 13 and 14:
SwitchBlade x3112 Installation Guid
Page 15 and 16:
Chapter 1 Overview This chapter pro
Page 17 and 18:
POWER SwitchBlade x3112 Installatio
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
1808 SwitchBlade x3112 Installation
Page 47 and 48:
Page 49 and 50:
Chapter 2 Installation This chapter
Page 51 and 52:
Page 53 and 54: SwitchBlade x3112 Installation Guid
Page 61 and 62: P O E 0 2 4 6 8 P O E S Y S T E M 1
Page 67 and 68: POWER SwitchBlade x3112 Installatio
Page 73 and 74: SBx31CFC SYS STATUS M/S PSU FAN M/S
Page 75 and 76: SYS STATUS M/S PSU FAN 10/100/1000B
Page 77 and 78: 0 1 22 23 SwitchBlade x3112 Install
Page 85 and 86: P O E 0 2 4 6 8 10 P O E SBx31FAN P
Page 91 and 92: POE PSU A and C PSU B and D PSU POW
Page 93 and 94: SYS STATUS 10/100/1000Base-T Switch
Page 95 and 96: Chapter 3 Troubleshooting This chap
Page 103: SwitchBlade x3112 Installation Guid
show all

SwitchBlade x3112 Installation Guide - Allied Telesis

Create successful ePaper yourself

Delete template?

Save as template?