SwitchBlade x3112 Installation Guide - Allied Telesis

More documents

Recommendations

Info

Chapter 2: Installation 8. If you have a second (redundant) AT-SBx3161 System Power Supply to install and the first power supply is installed in slot D, remove the blank power supply panel by lifting the blank panel handle and lifting the panel out of the slot C. If the first power supply is already installed in slot C, skip this step. 9. Install the second AT-SBx3161 System Power Supply into slot C or D, whichever is open, by repeating steps 3 through 7. The next step is to install the AT-SBx3165 PoE Power Supply(s). 68
SwitchBlade x3112 Installation Guide Installing the AT-SBx3165 PoE Power Supply To install the AT-SBx3165 PoE Power Supply, perform the following procedure: Note The label for the AT-SBx3161 System Power Supply model number is located on the left-hand side of the power supply handle as shown in Figure 22 on page 43. This power supply may be installed in one of the two power supply slots on the left-hand side of the chassis - slots A or B. See Figure 39 on page 65 for the location of these slots. 1. Choose a slot in the chassis for the AT-SBx3165 PoE Power Supply. You can install the system power supply in either of the two right-hand slots - A or B. See Figure 39 on page 65 for the location of these slots. If you want to install the power supply in slot A, remove the blank power supply panel by lifting the blank panel handle and lifting the panel out of the slot. Warning The AT-SBx3165 PoE Power Supply contains active electronic devices, which can be damaged by electro-static discharges (ESD). Follow the procedure given in “Protection Against Electrostatic Discharge (ESD)” on page 64 to guard against ESD damage when unpacking and installing these power supplies. 2. Remove the power supply from the shipping package. Note Store the packaging material in a safe location. You may use the original shipping material if you need to return the unit to Allied Telesis. 3. Ensure that the following hardware components are included in your package: – One AT-SBx3165 PoE Power Supply – One AC power cord If one of these items is missing or damaged, contact your Allied Telesis sales representative for assistance. 4. Move the locking handle on the AT-SBx3165 to the unlocked or up position. See Figure 43 on page 70. 69
Page 1 and 2:
M/S PSU FAN MASTER SLAVE NORMAL FAU
Page 3 and 4:
Electrical Safety and Emissions Sta
Page 5 and 6:
Contents Preface ..................
Page 7 and 8:
List of Figures Figure 1: Front Vie
Page 9 and 10:
List of Tables Table 1. Safety Symb
Page 11 and 12:
Preface This guide provides the har
Page 13 and 14:
SwitchBlade x3112 Installation Guid
Page 15 and 16:
Chapter 1 Overview This chapter pro
Page 17 and 18: POWER SwitchBlade x3112 Installatio
Page 19 and 20: SwitchBlade x3112 Installation Guid
Page 45 and 46: 1808 SwitchBlade x3112 Installation
Page 49 and 50: Chapter 2 Installation This chapter
Page 61 and 62: P O E 0 2 4 6 8 P O E S Y S T E M 1
Page 67: POWER SwitchBlade x3112 Installatio
Page 73 and 74: SBx31CFC SYS STATUS M/S PSU FAN M/S
Page 75 and 76: SYS STATUS M/S PSU FAN 10/100/1000B
Page 77 and 78: 0 1 22 23 SwitchBlade x3112 Install
Page 85 and 86: P O E 0 2 4 6 8 10 P O E SBx31FAN P
Page 91 and 92: POE PSU A and C PSU B and D PSU POW
Page 93 and 94: SYS STATUS 10/100/1000Base-T Switch
Page 95 and 96: Chapter 3 Troubleshooting This chap
Page 105 and 106: Appendix A Technical Specifications
show all

SwitchBlade x3112 Installation Guide - Allied Telesis

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?