SwitchBlade x3112 Installation Guide - Allied Telesis
SwitchBlade x3112 Installation Guide - Allied Telesis
SwitchBlade x3112 Installation Guide - Allied Telesis
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
POWER<br />
<strong>SwitchBlade</strong> <strong>x3112</strong> <strong>Installation</strong> <strong>Guide</strong><br />
AT-SB<strong>x3112</strong> Chassis<br />
The AT-SB<strong>x3112</strong> Chassis has a modular design that is seven Rack Units<br />
(RU’s) high. It contains a high-speed backplane which has the capacity for<br />
the following:<br />
Up to two switching fabric line cards<br />
Up to ten Ethernet line cards<br />
Up to two AC system power supplies<br />
Up to two PoE power supplies<br />
One fan tray<br />
Four individual A/C PSU plugs are provided on the rear panel for the<br />
power supply slot.<br />
The chassis provides high resiliency with a passive backplane, capacity for<br />
ten line cards, redundant controller cards and power supplies The chassis<br />
supports up to 40 ports at 10 Gbps of full-duplex data exchange or 400<br />
Gbps switching throughput capacity.<br />
All of the controllers, line cards, power supplies and the fan tray are hotswappable.<br />
Figure 1 and Figure 2 on page 18 show the front and rear views of the<br />
AT-SB<strong>x3112</strong> Chassis as shipped from the factory. The AT-SBx31FAN<br />
Tray is pre-installed in the chassis at the factory.<br />
P<br />
O<br />
E<br />
P<br />
O<br />
E<br />
S<br />
Y<br />
S<br />
T<br />
E<br />
M<br />
S<br />
Y<br />
S<br />
T<br />
E<br />
M<br />
0<br />
SBx31FAN<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
ESD<br />
1782<br />
Figure 1 Front View of the AT-SB<strong>x3112</strong> Chassis<br />
17