SwitchBlade x3112 Installation Guide - Allied Telesis

SwitchBlade x3112 Installation Guide
AT-SBx3165 PoE Power Supply
The AT-SBx3165 PoE Power Supply provides the PoE power for the
AT-SBx31GP24 PoE Line Card ports. The AT-SBx3165 PoE Power
Supply features a hot swappable design, which allows you to interchange
power supplies without causing electronic damage to the system
components or the power supply itself. The features of the AT-SBx3165
are:
1200 Watts for PoE power for the ports on the AT-SBx31GP24 PoE
Line Card(s)
One AT-SBx3165 PoE Power Supply supports for up to 40 ports
maximum connected to Class 4, PoE+ (IEEE 802.3at) power devices
Two AT-SBx3165 PoE Power Supplies support for up to 80 ports
maximum connected to Class 4, PoE+ (IEEE 802.3at) power devices
Hot swappable design
AC
DC
FAULT
SBx3165
PoE
POWER
Figure 22 AT-SBx3165 PoE Power Supply
Note
The label for the AT-SBx3165 PoE Power Supply’s model number is
on the left-hand side of the power supply handle. This power supply
may only be installed in one of the two power supply slots on the
left-hand side of the chassis - slots A or B.
See Figure 3, “AT-SBx3112 Chassis Slots” on page 18 for the
location of these slots.
43