SwitchBlade x3112 Installation Guide - Allied Telesis

P
O
E
0
2
4
6
8
P
O
E
S
Y
S
T
E
M
1
3
S
Y
S
T
E
M
5
ESD
POWER
7
9
SwitchBlade x3112 Installation Guide
3. With the bottom of the rack mount ears resting on the two rack mount
screws, tilt the top of the chassis back until both rackmount brackets
are flush and parallel with the vertical rack rails.
Top Screw Slot
Center Screw Slot
SBx31FAN
Top Screw
Slot
Bottom Screw Slot
10
Center Screw
Slot
11
Bottom Screw Slot
First 2 screws installed
1794
Figure 32. Installing the Rack Mount Screws
4. Install the six remaining rack mount screws (not provided) as displayed
in Figure 32 on page 61.
5. Torque all eight rack mount screws to 10 inch-lbs maximum with a # 2
Phillips head screw driver.
6. Remove the front panel shipping brace by removing the six mounting
screws holding the shipping brace in place.
P
O
E
P
O
E
0
2
4
1786
Figure 33. Removing the Front Panel Shipping Brace Screws
61