SwitchBlade x3112 Installation Guide - Allied Telesis

Chapter 2
Installation
This chapter describes how to install the SwitchBlade x3112 in an
equipment rack. This chapter contains the following sections:
“Reviewing Safety Precautions” on page 50
“Selecting a Site for the SwitchBlade x3112” on page 53
“Installing the AT-SBx3112 Chassis” on page 54
“Protection Against Electrostatic Discharge (ESD)” on page 64
“Installing the AT-SBx3161 System Power Supply” on page 65
“Installing the AT-SBx3165 PoE Power Supply” on page 69
“Installing the AT-SBx31CFC Fabric Control Card” on page 72
“Installing the Ethernet Line Cards” on page 76
“Installing SFP Transceivers” on page 79
“Installing the XFP Transceivers” on page 82
“Replacing the AT-SBx31FAN Tray” on page 84
“Cabling the Twisted-Pair or Fiber Optic Ports” on page 87
“Installing the Chassis Blank Panels” on page 88
“Applying A/C Power to the SwitchBlade x3112” on page 89
“Starting a Local Management Session” on page 93
49