Accusetter Manual - BC MacDonald & Co.
Accusetter Manual - BC MacDonald & Co.
Accusetter Manual - BC MacDonald & Co.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROGRAMMING - SINGLE CHECK MEASUREMENT<br />
Pol/Mag<br />
1) Rotate the ENTER button until "POL/MAG" is displayed and then press<br />
the ENTER button.<br />
2) Rotate the ENTER button to select "INPUT A" or "INPUT B" and then<br />
press the ENTER button. A numerical value with a polarity (+ or -)sign<br />
will be displayed.<br />
3) Enter the correct polarity and magnification. Refer to the <strong>Accusetter</strong><br />
program guide supplied with your gage.<br />
4) After setting the polarity and mag for one input press RST and then<br />
rotate the ENTER button to select the next input to be set up. Repeat<br />
steps 2 - 4.<br />
5) After programming all required inputs press RST until "XDUCER" is<br />
displayed. All Xducer options are now programmed.<br />
How To Enter Numerical Values and polarities<br />
Enter the correct numeral or polarity by pressing the enter button to move<br />
from one decimal place to another. To change numbers or polarity signs<br />
rotate the ENTER button left or right until desired number or sign is<br />
displayed.<br />
DEFINE Menu<br />
1) From Run mode press the ENTER button.<br />
2) Rotate the ENTER button to display "SETUP" and then press ENTER.<br />
3) Rotate the ENTER button to display "DEFINE" and then press ENTER.<br />
Function<br />
1) Rotate the ENTER button until "FUNCTION" is displayed and then<br />
press ENTER.<br />
2) Rotate the ENTER button to select from "BYPASS", "+PEAK", "-<br />
PEAK", or "TIR". Refer to the <strong>Accusetter</strong> program guide for the<br />
correct function for a given application.<br />
3) Press the ENTER button and the <strong>Accusetter</strong> will return to the DEFINE<br />
menu and display "FUNCTION".<br />
3-18