Accusetter Manual - BC MacDonald & Co.
Accusetter Manual - BC MacDonald & Co.
Accusetter Manual - BC MacDonald & Co.
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PROGRAMMING - MULTIPLE CHECK MEASUREMENT<br />
Pol/Mag<br />
1) Rotate the ENTER button until "POL/MAG" is displayed and then press<br />
the ENTER button.<br />
2) Rotate the ENTER button to select "INPUT A", "INPUT B", "INPUT<br />
C", or "INPUT D" and then press the ENTER button. A numerical value<br />
with a polarity (+ or -) sign will be displayed.<br />
3) Enter the correct polarity and magnification. Refer to the <strong>Accusetter</strong><br />
program guide for the correct value and polarity.<br />
4) After setting the polarity and mag for one input press RST and then<br />
rotate the ENTER button to select the next input to be set up. Repeat<br />
steps 2 - 4.<br />
5) After programming all required inputs press RST until XDUCER is<br />
displayed. All Xducer options are now programmed.<br />
How To Enter Numerical Values and polarities<br />
Enter the correct numeral or polarity by pressing the enter button to move from<br />
one decimal place to another. To change numbers or polarity signs rotate the<br />
ENTER button left or right until desired number or sign is displayed.<br />
DEFINE Menu<br />
# CHKS<br />
Use this menu to define the total number of checks to be programmed from 1 to 4.<br />
1) Rotate the ENTER button until "#CHKS" is displayed and then press ENTER.<br />
2) Rotate the ENTER button to select "#CHK=1", "#CHK=2", "#CHK=3", or<br />
"#CHK=4" and then press ENTER to return to the define menu.<br />
3-25