Accusetter Manual - BC MacDonald & Co.

PROGRAMMING - SYSTEM OPTIONS
AUTO AIR Menu (Optional)
If the optional automatic air shutoff is installed then this menu is available to
program the time delay before air shutoff or to disable the auto air shutoff.
See the Auto Air Shutoff in the Advanced Operation section 4.6 for more
information.
PART DB
The part database menu allows the operator to select an existing program to load or
save the current setup for future use
1) Rotate the ENTER button to display "PART DB" or press the PART DB
shortcut button.
2) Press the ENTER button.
3) "PART" and a number will be displayed.
4) Rotate the ENTER button to display the desired setup number.
5) Press the ENTER button.
6) "SELECT" will display.
7) Rotate the ENTER button to choose from "SAVE", "CLEAR", or "SELECT".
8) Press the ENTER button.
9) "PART" and a number will be displayed.
10) Press the RST button once. "PART DB" will be displayed.
RANGE
If Range is "ON" then the range menu is accessible from the level 0 menu.
1) From the System menu, rotate the ENTER button to select "RANGE OP" and
then press ENTER.
2) Rotate the ENTER button to select "ON" or "OFF" and then press ENTER.
3) Press the RUN button.
4) Rotate the ENTER button to select "SAVE" and then press ENTER.
3-43