Akai MPC-60 v2.0 Owners Manual.pdf - Fdiskc

96
NOTE 3: If the copied data is longer than the sequence to be copied into,
the portion of the copied data which extends past the end will not be
copied. If an attempt is made to copy past the end of the destination
sequence, the following warning screen will appear when is
pressed:
At this point, you may either press to copy it anyway, or press
MAIN SCREEN to cancel the copy.
NOTE 4: If the destination track is unused, the contents of the CH
fields (in the PLAY/RECORD screen) of the source track will be copied
to the corresponding fields of the destination track.
4.3.7 Copying an entire sequence to another sequence
This function is useful if you want to make a perfect copy of a sequence,
including all parameters, into another sequence number, replacing all data
and parameters previously contained in that sequence number. To use this
function, select option 7 from the EDIT screen, and the following screen
will be displayed:
A description of the on-screen fields follows:
• The COPY CONTENTS OF SEQUENCE field:
This is the sequence to be copied from. The active sequence number is
automatically inserted here when this screen is entered.