R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>R308</strong> <strong>AT</strong> <strong>Command</strong>s<br />
+BSET – Set local Binding Table Entry<br />
Write <strong>Command</strong><br />
<strong>AT</strong>+BSET:,,,<br />
[,]<br />
Response<br />
OK<br />
Where<br />
is the type of binding as shown<br />
below,<br />
is the local endpoint<br />
is the cluster ID<br />
is either the EUI64 of the<br />
target device, or a multicast ID<br />
the remote endpoint which is<br />
not specified in case of a multicast binding.<br />
The new binding is created in the next<br />
available free binding table entry.<br />
Types:<br />
1= Unicast Binding with EUI64 and remote<br />
EP specified<br />
2= Many to one Binding with EUI64 and<br />
remote EP Specified<br />
3= Multicast Binding with Multicast ID<br />
Specified<br />
Example<br />
<strong>AT</strong>+BSET:1,01,0002,000d6f000059474e,01<br />
Note<br />
All parameters must have exactly the correct<br />
number of characters<br />
Use on<br />
All Devices<br />
SW release R307 ●<br />
+BCLR – Clear local Binding Table Entry<br />
Write <strong>Command</strong><br />
<strong>AT</strong>+BCLR:XX<br />
Response<br />
OK<br />
Where XX is the entry number of the binding<br />
table entry which is to be cleared. To keep<br />
the numbering of the local binding table inline<br />
with the numbering of the remote binding<br />
table all remaining entries are moved to the<br />
beginning of the table.<br />
Use on<br />
or ERROR:<br />
represents the error code explained in<br />
section 3.<br />
All Devices<br />
SW release R307 ●<br />
©2012 Telegesis (UK) Ltd - 47 - <strong>AT</strong> <strong>Command</strong> <strong>Manual</strong> (Rev 3.08)
Change language