R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>R308</strong> <strong>AT</strong> <strong>Command</strong>s<br />
S44 – Profile ID for xCASTs (volatile)<br />
Description<br />
The profile ID for all messages.<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Parameters<br />
XXXX<br />
The profile ID of any xCAST message<br />
Becomes effective<br />
Instantly<br />
Storage<br />
Volatile<br />
Factory Default<br />
Defined in S45<br />
SW release R300 ●<br />
S45 – Initial Setting of S44<br />
Description<br />
The initial setting of S44 stored in non<br />
volatile memory<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Parameters<br />
XXXX<br />
The profile ID of any xCAST message<br />
Becomes effective<br />
After Soft or Hard Reset<br />
Storage<br />
Non-Volatile<br />
Factory Default<br />
C091<br />
SW release R300 ●<br />
S46 – Start-up Functionality 32-bit number<br />
Description<br />
Volatile 32-bit register which can be used by<br />
some of the build in functionality<br />
Parameters<br />
XXXXXXXX<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Becomes effective<br />
Instantly<br />
Storage<br />
Volatile<br />
Factory Default<br />
00000000<br />
SW release R303 – upgraded to 32-bit ●<br />
©2012 Telegesis (UK) Ltd - 94 - <strong>AT</strong> <strong>Command</strong> <strong>Manual</strong> (Rev 3.08)