R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>R308</strong> <strong>AT</strong> <strong>Command</strong>s<br />
S27 – Functionality at Bootup<br />
Description<br />
Describes the immediate action taken after<br />
boot-up (and stack initialization).<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Parameters<br />
XXXX<br />
If set to 0 the functionality is disabled. Please see<br />
section 0 for a list of available functionalities.<br />
Becomes effective<br />
Instantly<br />
Note<br />
On versions before R305 this was executed<br />
before the protocol stack was <strong>ru</strong>nning so it<br />
could not be used for network or message<br />
functions<br />
Storage<br />
Non-Volatile<br />
Factory Default<br />
0000 (none)<br />
SW release R305 ●<br />
S28 – Functionality at Network Join<br />
Description<br />
Describes the immediate action taken after<br />
joining a network.<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Parameters<br />
XXXX<br />
If set to 0 the functionality is disabled. Please see<br />
section 0 for a list of available functionalities.<br />
Becomes effective<br />
Instantly<br />
Storage<br />
Factory Default<br />
Non-Volatile<br />
0000 (none)<br />
SW release R302 ●<br />
©2012 Telegesis (UK) Ltd - 80 - <strong>AT</strong> <strong>Command</strong> <strong>Manual</strong> (Rev 3.08)
Change language