R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
R308 AT Command Manual - wless.ru
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>R308</strong> <strong>AT</strong> <strong>Command</strong>s<br />
S4C – Endpoint 2 Output Cluster List<br />
Description<br />
Register defining the output cluster list of the<br />
device attached to the Node‟s endpoint 2<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Parameters<br />
[XXXX,XXXX,XXXX,XXXX,XXXX,XXXX,<br />
XXXX,XXXX,XXXX,XXXX,XXXX,XXXX]<br />
A list of a maximum of 12 x 16 bit cluster IDs<br />
separated by commas. The list may have any<br />
length from 0 to 12 clusters<br />
Becomes effective<br />
Instantly<br />
Storage<br />
Factory Default<br />
Non-Volatile<br />
0000<br />
SW release R302 ●<br />
S4D – Mobile End Device Poll Timeout<br />
Description<br />
In an FFD, the register defining the amount<br />
of time after which a mobile end device times<br />
out of its parent‟s child table if it has not<br />
polled.<br />
In an MED, defines the delay between an<br />
MED losing contact with its parent and<br />
reporting “LostPAN”.<br />
Parameters<br />
00XX<br />
8-bit number led by “00”, which represents the<br />
timeout in quarter seconds. The default of 0x0014<br />
results in a timeout of 5s.<br />
Operations<br />
R/W LOCAL<br />
R/W REMOTE<br />
Becomes effective<br />
After Soft or Hard Reset<br />
Storage<br />
Non-Volatile<br />
Factory Default<br />
0014<br />
SW release R302 ●<br />
©2012 Telegesis (UK) Ltd - 97 - <strong>AT</strong> <strong>Command</strong> <strong>Manual</strong> (Rev 3.08)
Change language