OPERATIONS MANUAL

Flight Controls
Flap Indication when in Secondary Mode:
Displayed when a fault is detected in the primary flaps control.
Leading edge flap
group is in transit.
Leading edge flap
group is up. If
outline is amber:
No flap motion
while commanded
to extend.
Trailing edge flap
position sensor is
inoperative.
Flap lever. If green:
Lever position agrees
with flap positions.
Leading edge flap
group is extended.
Leading edge flap
position sensor is
inoperative.
Leading edge
flap group stays
extended while
commanded to
retract.
Leading edge flap
group is stuck
in transit while
commanded to
move.
Position of trailing
edge flap group. If
amber: Asymmetry
or drive failure is
detected.
Flap Indication when in Alternate Mode:
Displayed when the alternate flaps control is armed.
Leading edge flap
group position
indication.
Trailing edge flap
group position
indication.
— Page 263 —
For preview only. Not for sale. Many pages are intentionally removed.