OPERATIONS MANUAL

Simulator Handling
Instructor > Situation > Service:
• Hover the mouse over an object on this page to show tooltips with descriptions.
• The towing simulation tows the aircraft to the entered target heading, and then continues on
this heading until the towing is manually or automatically stopped. Proceed as follows:
1. Under Towing, select Start or Auto.
2. Set the parking brake.
3. On your ACP, set the receiver selector (green light) to FLT and hold the INT switch for
2 seconds, or set the transmitter (MIC) to FLT and hold the R/T switch for 2 seconds.
The 2-second phase simulates you calling the ground crew. Check your volumes are up.
4. Ground: “Steering pin inserted, release brakes, please.”—Release the parking brake.
5. Ground: “Pushing back.” (You may now start the engines.)
6. If Start is selected under Towing, select Stop when you want to stop the towing. If Auto
is selected, it will stop automatically after 2 minutes.
7. Ground: “Set parking brake, please.”—Set the parking brake.
8. Ground: “Towing system removed and steering pin removed.”—Towing is completed.
— Page 40 —
For preview only. Not for sale. Many pages are intentionally removed.