OPERATIONS MANUAL

Flight Instruments
ND Symbology: (continued)
Peaks mode data
Indicates altitude of highest obstacle
(upper value) and of lowest terrain
(lower value) in displayed sector.
Terrain display
Tiles in different colors and dot patterns
indicate certain relative altitudes. Refer
to EGPWS in chapter Warning Systems.
Sea level display (cyan)
Optionally enabled if peaks mode
function is installed. Indicates sea area
when land is within displayed sector.
WXR and terrain range arcs
Three range arcs are shown in white.
Airports
Shown when ARPT is selected on the
onside EFIS control.
Waypoints
Shown when WPT is selected on the
onside EFIS control and ND range is
below 80.
VORDME and VORTAC stations
Shown when STA is selected on the
onside EFIS control.
DME stations
Shown when STA is selected on the
onside EFIS control.
VOR-only stations (no paired DME)
Shown when STA is selected on the
onside EFIS control.
Aircraft triangle & trend vector
Trend indicates lateral path based on
bank angle and ground speed. Each
segment equates to 30 seconds.
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
APP VOR MAP PLN
— Page 307 —
For preview only. Not for sale. Many pages are intentionally removed.