OPERATIONS MANUAL

Simulator Handling
Keyboard – Summary:
When not connected to a CDU, the keys provide the following functions (those in brown font
refer to the captain’s side when the first officer is the PNF, else to the first officer’s side):
Esc Shows or hides the Instructor (also works when a CDU is connected)
F1 Quickly advances thrust lever 1
F2 Quickly advances thrust lever 2
F3 Quickly advances thrust lever 3
F4 Quickly advances thrust lever 4
F5 Quickly advances all thrust levers
F6 A/P disengage bar on MCP
F7 Moves the speed brake lever forward
F8 Moves the speed brake lever aft
F9 Moves the flap lever forward
F10 Moves the flap lever aft
1 Quickly retards thrust lever 1
2 Quickly retards thrust lever 2
3 Quickly retards thrust lever 3
4 Quickly retards thrust lever 4
5 Quickly retards all thrust levers
6 Turns the SPD selector by –1 unit
7 Turns the SPD selector by +1 unit
8 Turns the HDG selector by –1°
9 Turns the HDG selector by +1°
0 Sets the MCP HDG to the current heading
Backspace Cycles reversers: Deploy-&-max-reverse, idle, stow, ...
Home TO/GA switch
PgUp A/T disconnect switch
Q
W
E
R
T
Y
U
I
O
P
COM frequency transfer switch
Turns the outer COM standby frequency selector up
Turns the inner COM standby frequency selector up
Causes the PNF to say the last checklist title
A/T ARM switch
Turns the V/S selector by –100 fpm
Turns the V/S selector by +100 fpm
Turns the ALT selector by –100 ft
Turns the ALT selector by +100 ft
Pauses/unpauses the entire simulation, including the flight deck controls.
(continued next page)
— Page 29 —
For preview only. Not for sale. Many pages are intentionally removed.