PXR3 Instruction Manual - Coulton Instrumentation

2-3 Parameter functions and method of settingsMethod of setting the SV (Setting value)[Description]• The SV is a target value for control.• Any SV that is outside of the range set in the parametersof (lower limit) and (upper limit) of thethird block cannot be set. (See page 50.)Related parameters: (page 50)(page 50)[Setting example] Changing the SV from 250.0°C to 348.7°CDisplayPV indicationSV indication1.2.Operating procedurePress the SEL key to display the SV. (SV lamp is lit.)Press the or keys to display .3.will be registered in the SV (front SV) in three seconds. After that, the controller willoperate with the SV being .12